Lord of War


  • Sale
  • Regular price $40.00
Tax included. Shipping calculated at checkout.


Battery Access:

Top of Laser




Any 20mm Picatinny Rail

Reticle Colour:






Battery Type:

2 x LR44


This Gel Blasters Red Laser Pointer has about 40-meter visual range. Its red illumination pointer is for low light situations and can be zeroed in to accurately and effectively take-out targets. This Red Dot Laser would be more suited for Short to Medium range shooting engagements, it fits onto Pistol gel blasters that have a Picatinny rail on them.

It can be mounted on the underside of the Pistol Gel Blaster if your pistol has a Picatinny rail on it. The cable is 17cm long and on the end, there is a small pressure pad that when squeezed and held will turn the laser on and off when pressure is released. Generally, the pressure pad is fitted to the handle of your pistol under where your thumb would sit. Then the cable is attached and connected along the pistol and the laser is mounted on the front of the pistol.

The laser also has a switch that allows you to turn on the laser and have it remain on until you switch it off. The cable is designed so you just apply pressure to turn the laser on before you shoot, and then release pressure after the shot and the laser goes off as to not allow your enemies to know where you are shooting from. There is also a long cable version of the same laser suited for rifles with Picatinny rail. ©LORDOFWAR

  • 1 x Metal Gel Blaster Laser Pointer
  • 2 x Allen Keys
  • 1 x Pressure Pad (17cm)
  • Tip 1 - (90% of the time your new gel blaster will come with a fully charged battery) Charging batteries, charge your included Lithium battery between 1-4 hours. When charging with the included wall charger the light/s will flash on and off whilst in charging mode, then once it is fully charged, the light/s will turn to a solid green colour. Never leave the battery charging unattended as it could start a fire if there is a fault in the battery due to incorrect use or charging. Never leave the batteries charging more than 4hours as they can overcharge and fault the battery so it will no longer work or possibly start a fire. We advise charging your batteries on the sink or on the stove where ever is safe if a fire was to start so it can be controlled and not destroy what you have the battery sitting on while charging. We recommend only ADULTS charge the batteries due to risks involved when charging batteries. ©LORDOFWAR
  • Tip 2 - When you notice a performance drop in your gel blaster, that will indicate the battery is becoming flat. Stop using your gel blaster and recharge the battery straight away as running the battery flat has a likely hood of damaging the cells permanently and you may need to buy a new battery. ©LORDOFWAR
  • Tips 3 - When Growing your gels in standard temperature tap water, they need to be fully submerged underwater for a minimum of 4-5 hours. Once you have grown your gels, leave them in water and keep them under 30 degrees and not in direct sunlight for a maximum of 2 weeks for best performance. ©LORDOFWAR
  • Tip 4 - Once your gel balls are ready for use, strain any excess water off before use, do not fully dry them as they need dampness for lubrication to work properly. ©LORDOFWAR
  • Tip 5 - Opening or upgrading your gel blaster will void your warranty. This includes any disassembly of your gel blaster, upgrading spring or any internal parts. ©LORDOFWAR
  • Tip 6 - If your new purchased Gel Blaster came with a 7.4V battery when purchased, then that is what it was designed and built to use. If you fit it with an 11.1v battery you will void its warranty and as it's not designed for an 11.1v battery it could strip the internal gears making it unusable unless it was rebuilt. ©LORDOFWAR