SJT

SJ81-2 GEL BLASTER

  • Sale
  • Regular price $250.00
Tax included. Shipping calculated at checkout.


SPECIFICATIONS

Gears

Nylon

Action

Safe, Semi and Full Auto

Range

20-25m

Gel Size

7-8mm

Butt stock

Adjustable

Feed type

Electronic Mag 

Mag Prime

Yes

Battery voltage

7.4v

Feet per second

250-280fps

Blaster Material

Nylon

Battery Connection

JST Plug

DESCRIPTION

If you are looking for an M4 like no other than the SJ81-2 is certainly the blaster for you. With a full nylon external and internal build this blaster seems like another typical M4 that is on the market, so SJ went 1 step further. Shooting at 280 FPS and being a perfectly accurate blaster as well this M4 is quite the competitor when comparing to others on the market. But what really sets this blaster apart from the rest is the realistic Blowback system inbuilt into the mag prime, so when you pull the charge handle back, the Bolt on the side of the dust cover locks into a set position while priming then you press the bolt release on the side and the cover shoots forward. When ever you shoot the blaster the bolt on the side reciprocates and gives you a cool blowback feeling while shooting the blaster. Being a competitively priced blaster and the power that you’re getting out of it un-modded this is defiantly a must have for all blaster collections!

INCLUDED
  • 1 x JY MSR Gel blaster
  • 1 x Standard Magazine
  • 1 x Packet of Gel Balls
  • 1 x Flash hider
  • 1 x Extended outer/inner barrel
  • 1 x Upgrade spring
TIPS
  • Tip 1 - (90% of the time your new gel blaster will come with a fully charged battery) Charging batteries, charge your included Lithium battery between 1-4 hours. When charging with the included wall charger the light/s will flash on and off whilst in charging mode, then once it is fully charged, the light/s will turn to a solid green colour. Never leave the battery charging unattended as it could start a fire if there is a fault in the battery due to incorrect use or charging. Never leave the batteries charging more than 4hours as they can overcharge and fault the battery so it will no longer work or possibly start a fire. We advise charging your batteries on the sink or on the stove where ever is safe if a fire was to start so it can be controlled and not destroy what you have the battery sitting on while charging. We recommend only ADULTS charge the batteries due to risks involved when charging batteries. ©LORDOFWAR
  • Tip 2 - When you notice a performance drop in your gel blaster, that will indicate the battery is becoming flat. Stop using your gel blaster and recharge the battery straight away as running the battery flat has a likely hood of damaging the cells permanently and you may need to buy a new battery. ©LORDOFWAR
  • Tips 3 - When Growing your gels in standard temperature tap water, they need to be fully submerged underwater for a minimum of 4-5 hours. Once you have grown your gels, leave them in water and keep them under 30 degrees and not in direct sunlight for a maximum of 2 weeks for best performance. ©LORDOFWAR
  • Tip 4 - Once your gel balls are ready for use, strain any excess water off before use, do not fully dry them as they need dampness for lubrication to work properly. ©LORDOFWAR
  • Tip 5 - Opening or upgrading your gel blaster will void your warranty. This includes any disassembly of your gel blaster, upgrading spring or any internal parts. ©LORDOFWAR
  • Tip 6 - If your new purchased Gel Blaster came with a 7.4V battery when purchased, then that is what it was designed and built to use. If you fit it with an 11.1v battery you will void its warranty and as it's not designed for an 11.1v battery it could strip the internal gears making it unusable unless it was rebuilt. ©LORDOFWAR