• Sale
  • Regular price $310.00
Tax included. Shipping calculated at checkout.





Safe, Semi and Full Auto



Gel Size


Butt stock


Feed type

Electric Magazine

Mag Prime


Battery voltage


Feet per second

260 - 280fps

Blaster Material

Nylon & Metal

Battery Connection

JST Plug


The XYL ARP9, is the best ARP9 out of all the ones on the market. Coming out with a 11.1v battery this Gel Blaster has a surprisingly fast fire rate; this is due to a MOSFET being fitted to this Gel Blaster via the buffer tube. The MOSFET that is fitted to this Gel Blaster is a current protection chip, this will protect your Gel Blaster and battery when connected and make sure that your battery and Gel Blaster wont short circuit and increases the longevity of your Gel Blaster.

This Gel Blaster is also fitted with a mock blowback system, when you fire you will fell a slight recoil to it and also see the side hatch move backward and forwards. With a few metal components to top it off as well as a Very Fast Trigger response make this the best CQB ARP9 on the market. ©LORDOFWAR

  • 1 x ARP9
  • 1 x Standard Magazine
  • 1 x 11.1v Battery
  • 1 x USB Charger
  • 1 x Packet of Gel balls
  • Tip 1 - (90% of the time your new gel blaster will come with a fully charged battery) Charging batteries, charge your included Lithium battery between 1-4 hours. When charging with the included wall charger the light/s will flash on and off whilst in charging mode, then once it is fully charged, the light/s will turn to a solid green colour. Never leave the battery charging unattended as it could start a fire if there is a fault in the battery due to incorrect use or charging. Never leave the batteries charging more than 4hours as they can overcharge and fault the battery so it will no longer work or possibly start a fire. We advise charging your batteries on the sink or on the stove where ever is safe if a fire was to start so it can be controlled and not destroy what you have the battery sitting on while charging. We recommend only ADULTS charge the batteries due to risks involved when charging batteries. ©LORDOFWAR
  • Tip 2 - When you notice a performance drop in your gel blaster, that will indicate the battery is becoming flat. Stop using your gel blaster and recharge the battery straight away as running the battery flat has a likely hood of damaging the cells permanently and you may need to buy a new battery. ©LORDOFWAR
  • Tips 3 - When Growing your gels in standard temperature tap water, they need to be fully submerged underwater for a minimum of 4-5 hours. Once you have grown your gels, leave them in water and keep them under 30 degrees and not in direct sunlight for a maximum of 2 weeks for best performance. ©LORDOFWAR
  • Tip 4 - Once your gel balls are ready for use, strain any excess water off before use, do not fully dry them as they need dampness for lubrication to work properly. ©LORDOFWAR
  • Tip 5 - Opening or upgrading your gel blaster will void your warranty. This includes any disassembly of your gel blaster, upgrading spring or any internal parts. ©LORDOFWAR
  • Tip 6 - If your new purchased Gel Blaster came with a 7.4V battery when purchased, then that is what it was designed and built to use. If you fit it with an 11.1v battery you will void its warranty and as it's not designed for an 11.1v battery it could strip the internal gears making it unusable unless it was rebuilt. ©LORDOFWAR